CCV Driver 100 Watts 24V DC

SERIES
PLX-CCVDR24V-100
This Class 2 CCV-DR 0-10V dimming driver features a dual mode constant voltage and constant current output. Featuring a metal housing with Class I design which allows it to operate with case temperatures from -40°F to 194°F under free air convection. Standard builtin protections include short circuit, over-current, over-voltage, and over temperature. The metal housing carries an IP65 ingress protection allowing it to be used in both indoor and outdoor applications, with type HL rating for hazardous location use. Constant voltage + Constant current modes 3-in-1 dimming capable: 1~10VDC, 10V PWM and resistance dimming Maximum wattage output up to 100W Built-in active Power Factor Correction (PFC) Class 2 design and IP65 rating Auto-reset protection for short circuit and over-voltage cURus Recognized to UL8750 Standard “Type HL”
CCV Driver 100 Watts 24V DC
CCV Driver 100 Watts 24V DC

Performance

Input Voltage
90-305V AC
Output Voltage
24V DC
Input Frequency
47-63 Hz
Output Frequency
4A
Wattage
100 W
Power Factor
≥0.98/115V AC ≥0.95/230V AC ≥0.92/277V AC
Minimum Load
40 W
Temperature Range
-40C (-40F) to 90C (194F) degrees
Dimming
PMV 0-10V

Physical

Weight
2.36 lbs
Width
2.67 Inch
Length
8.97 Inch
Height
1.52 Inch

Certification

Safety Rating
cURus Recognized
Airtight
Y
IP Rating
IP65
Location Rating
Wet
Indoor
Y
Outdoor
Y
Class 2
Y
Item Number Length Input Voltage Wattage IP Rating UOM
PLX-CCVDR24V-100 8.97 Inch 90-305V AC 100 W IP65 Each